Perhaps the two most interesting things about it are the head format and a bit of a secret hidden within the handle. Another thoroughly modern splitting axe, this one from the folks at Husqvarna is a bit more manageably-sized at just 28″ in length. However, with a 5-pound steel head and fiberglass composite handle, it’s still perfectly capable of making short work of your future firewood. That’s aided by a coating on the axe head meant to “improve cutting,” and the whole modern package is backed by a lifetime warranty. Furthermore, if you like this axe’s style, the brand actually offers a number of different options made with the same styling and materials, so you can collect the full set. The counterpart to their felling brethren, splitting axes are similar in their size and basic format — long handles with fairly hefty metal heads. However, the heads of these axes tend to have more bulk and a narrower blade. As is the case with felling axes, you can use them for other purposes, but their primary purpose is where they really shine. As their name suggests, pack axes are designed specifically to fit in, on, or alongside an outdoor pack.
These lightweight tools designed for one-handed use, ideally suited to chopping and splitting small wood. The famous Hudson Bay ax is a great example of this group. They are light enough to carry, but heavy enough to chop well. Dating back to the stone-age, axes have served a critical role in the processing of firewood, the building of dwellings, and survival in the wild. And very much like knives, there are different axes which are suited for different jobs in the bush. When it comes down to it, you could fell a tree with a tomahawk or throw a large ax—but it’s best to have the right tool for the job. Here are just a few of the wood chopping options to consider for your backcountry camp. Sometimes the patterns and textures of the wood grain are the cutting marks left by the lathe. For example, this handle has a great tiger stripe look to it. We could sand it all down and get rid of those textures, or we can enhance it.
Use the drawknife to flatten the sides of the handle. As you remove wood, pay attention to your grain structure. If your stave is nice and straight-grained, the grain structure should be less of a problem. You don’t want to have the cut start to run into the handle and create a weak spot. If this happens, stop immediately, turn your handle around, and cut from the other direction. Turn your handle 90 degrees so one of the narrow edges is facing up.
The powerful 4-pound axe head adds a good balance to the overall design of the axe and provides an easy and effective swing. Its integrated-moulded handle has a safety guard that gives you a non-slip grip. Walnut oil is a light, food-grade finishing oil traditionally used for wooden eating utensils and bowls, but it also works great as a finish for axe handles and other wooden tools. Walnut oil doesn’t contain any metallic or chemical additives. I typically follow that up with Obenauf’s Heavy Duty LP which I carry a small tin of in the field. I not only use the LP as another pretective step for my axe handles but also for the axe head, knife blades sheaths, boots, blah blah blah. We also like that the axe head is six-inches, and the cutting edge is 3.5-inches.
The risk level, particularly in a hatchet, is extremely high. Lay one end of the cotton string at the top of the repair, and begin winding the string around and around the axe handle. You don’t even need to tie the string, just cross over the end a few times as you begin winding and that will hold it tightly, especially as the glue begins to set. Make sure to wind the string as closely together as you can. You want little or no gap between each wind of string, for maximum strength. Indubitably, single-bitted axes are a great tool for woodcutting. Its head has two ends; one has the cutting blade and another has the poll. Whilst the poll looks similar to a hammer, never ever try hamming it. Most of you are aware of the fact that the axe is the oldest tool for humans.
This is an heirloom product that will last for generations. Built to last my lifetime, and probably my son’s lifetime . The craftsmanship, quality, durability and price are excellent. I have owned, used, and often abused just about every brand that people praise and are considered “the best”. As with most purchases, it’s essential to be familiar with the different brands. When searching for the right bushcraft axe, it is essential to consider how you plan to use your axe. Due to its clean, easy to control design, this axe is best suited for carpentry and similar jobs, rather than for camping or hunting. Nevertheless, the axe is still sturdy and strong, should the need arise for heavier use. Particularly appealing about the Hudson Bay Axe is the manufacturer’s lifetime warranty, which ensures you don’t need to constantly worry about your axe breaking.
The axe head of a good quality axe such as those made by Gransfors Bruks is typically made of steel that is not stainless. That is, it will quite easily rust if allowed to remain damp for a period of time. This would obviously have a detrimental effect on both the finish and ultimately the longevity of the axe head. A good axe will have a head made from high quality steel. The head will be tempered so that the bit of the axe is tough, not easily chipped and able to attain a very sharp yet resilient edge. This quality piece of steel will also need some protection and care to keep it in prime condition. Start with the bark side first and trim away the bark and a few rings of growth. I use a carpenter’s axe, which has a sharp edge ground on only one side, much like a plane blade, but you can use any hatchet. The advantage of a carpenter’s axe is that the edge is straight and the blade cuts straight down rather than into your stave. With the wood in the photo above, I will use the chunk on the left, close to the bark and where the growth rings are fairly close.
You need a head guard that’s going to act as the perfect sheath to your axe. Style N Craft’s model fits to most standard shaped axes, single bladed, of course. Between leather, nylon stitching, and rivets holding this piece of beautiful craftsmanship together, you’ll be able to stow your axe with no worry in the world. Holding it near the head, with the rest of the handle behind you, while the axe head is facing a forty-five degree angle . Keep a firm grip on the axe, especially while walking from one area of your campsite to the other, or around your backyard. Put a protective cover on your axe, even if it’s not in storage. You may think that you’re the only one that’s accessing your shed out back, but if you have kids, you can rest assured that they’re poking around from time to time.
The head is pretty sharp to split the log in a single go. Don’t store in too warm conditions, since the handle might shrink. With no surprises, this Swedish made wooden axe gets the 2nd spot in our list. This particular model is with a traditional look and the best wood splitter you would love to buy. Thousands of 5 stars reviews form all around the world makes it best woodman axe. Because of the Head and special handle made of strong plastic material gives you dream balance to strike with accuracy. WORKPRO tools can be found at many retailers around the world. Complete the form to the right and one of our product specialists will contact you with the best location for you to purchase this product. WORKPRO is committed to providing you with quality tools you can trust to achieve professional results for your next project.
The more you use and maintain an axe, the better it looks. Today we’re looking at easy and simple handle treatments for your Hults Bruk axe. Handle treatments not only help preserve and protect your handle but also will enhance its appearance over years and years of hard use. Place the safety disc on the eye of the axe head so it is completely covered. Now transfer the positions of the holes in the safety disc onto the handle using e.g. a pencil. Even though the hickory and ash that OCHSENKOPF uses for its handles are two of the strongest and longest-lasting materials there are, the fact is they are still natural materials. Environmental influences such as the weather and temperature can affect the wood over time. Product care and the right storage are also extremely important in order to maintain the quality for the long term.
22 1/8″ overall. 9″ black finish, drop forged 1055 carbon steel hawk with 3 1/4″ cutting edge and spike. Natural finish American hickory handle. Bulk packed. Made in Taiwan. A brand that specializes in all things relating to outdoor work, home improvement, and tools with a blade, they’ve nailed it when it comes to choosing the best wood splitting axe. You can rest assured you’re getting great value, high performance, and lifelong durability with this super splitting axe. Axe head is secured to the handle by a wooden and steel wedge for strong construction. The head of the axe has been covered in a non-stick coating that reduces friction against the dense wood for improved glide and splitting. It can also be used as a hammer when paired with a regular splitting wedge, however, it’s not recommended to use with a steel wedge.
However, it will easily cut through small branches, small limbs and bush that’s in the way while on a hike. It has a rugged feel and look to it, but what we like even more is it’s super sharp. Campers will not struggle to chop wood or fell trees with the Gransfors Bruks Small Forest Axe. This isn’t a bad thing because it means it’s lightweight; It weighs only two-pounds, and it’s an excellent tool for limbing and felling trees. Since it’s not that large, the small forest axe can easily split small sticks or cut through limb-wood. This specific axe might be the perfect wood-handle camping axe, but it isn’t expensive. In fact, it sells for under $50, which is a bargain.
Medium-sized models, also known as limbing axes, are larger in size and weight. Their usual weight is about two pounds, whereas the average handle length is at least twenty-four inches. These axes allow users to execute powerful swings as long as they handle them with both hands. Medium-sized models are the right choice for splitting firewood, chopping down trees, and removing their limbs. Located in the Tennessee River Valley – Appalachian Hickory wood is manufactured into sledge, hammer, axe and pick handles by skilled craftsmen. The handles start with hickory logs, and finish with a beautifully dipped lacquer, or smooth tumbled wax. Axes are designed to be used with two hands, which is why they come up to about 36”. Axes are primarily used for chopping logs, felling trees, and anything else that requires great power, while hatchets are the one-handed baby brother to the mighty axe. Hatches come with one primary use, but axes can be specifically designed for different purposes. If you’re a true outdoorsman, you may already be looking for a unique felling axe, and a separate one for splitting.